Centralized Energy Storage Battery System( 1MWH/2MWH)
- Commodity name: Centralized Energy Storage Battery System( 1MWH/2MWH)
- Product Description
-
Cell Parameters Cell Type LFP 280Ah Rated Voltage 3.2V Installed Capacity Rated Energy (kWh) 1048.32 Battery Rated Voltage (V) 748.8 Battery Voltage Range (V) 331.8-842.4 Max DC Current (A) 140A Single Cluster Battery Pack 18s1p Number of Battery Modules 13s5p AC Side Rated Power 500KW Configuration Margin 104.83% Rated Grid Voltage 400V (-15~10%) Rated AC Current 140A Allowable Voltage Range 360V~440V Rated Grid Frequency 50/60HZ Power Factor >0.99 System Parameters Dimensions (WHD mm) 20ft container System Efficiency >90% Cycle Life 8000+ Cooling Method Forced Air Cooling Allowable Ambient Temp. -20~50° Max Operating Altitude 3000m (Derating above 2000m) Fire Protection Combustible gas/smoke/temperature detection + total flooding gas fire suppression + water spray Protection Level IP54 Communication RS485/CAN/LAN Operating Modes Peak shaving & valley filling, Demand response, Microgrid, UPS backup Compliant Standards GB/T36276-2018 (Cell, Module, Cluster) GB/T34120-2017 (PCS) GB/T34131-2017 (Controller) Auxiliary Power 14kW-380V/50Hz Corrosion Resistance C3 (C4/C5 optional) Note: The power configuration above can be scaled down. Adjust the number of battery modules and battery clusters according to customer requirements to accommodate various application scenarios and power configurations.
Key words:
Firecrackers, fireworks, chemical raw material production, chemical raw material storage
FAQ
Oxidant stability and safety issues
Easy to decompose: Many oxidants are easy to decompose when heated, damp, exposed to light or in contact with other substances, generating heat, gas and even causing an explosion. For example, hydrogen peroxide, hypochlorous acid, etc. will spontaneously decompose under certain conditions, release oxygen, and increase the risk of explosion.
Explosive: some oxidants such as chlorates, nitrates and organic peroxides, etc., after friction, impact, vibration, etc., can easily cause explosion. Therefore, special care is required during storage, transportation and use.
Toxicity and corrosiveness: Some oxidants such as bromine pentafluoride are toxic and pose a threat to human health. At the same time, they may also be corrosive to materials such as metals and damage equipment or containers.
Oxidant reactivity issues
Strong oxidation: oxidant has strong oxidation, can react violently with a variety of substances, and even cause combustion or explosion. For example, they can react violently with inflammables, organics, reducing agents, etc., generating large amounts of heat and gas.
Violent reaction with acid: most oxidants will react violently with acid and even explode. Such as potassium chlorate, benzoyl peroxide, etc. in case of sulfuric acid that explosion. Therefore, these oxidizing agents must avoid contact with acids or alkalis during storage and use.
metathesis reaction: a metathesis reaction may occur between oxidants, resulting in high temperature, combustion and even explosion. For example, nitrite reacts violently when it encounters a stronger oxidant than it.
Oxidant storage and transportation issues
Strict storage requirements: The oxidant needs to be stored in a cool, dry, well-ventilated place, avoiding direct sunlight and high temperature environment. At the same time, different varieties of oxidants should be stored in stacks, and it is strictly prohibited to mix organic combustibles.
High transportation risk: During transportation, the oxidant needs to be especially careful to avoid vibration, friction and impact. At the same time, it is necessary to select appropriate packaging materials and transportation methods to ensure safe transportation.
Related Products